2013 Toyota Tundra Oil Change Guide

If you’re the owner of a 2013 Toyota Tundra, then you’ll want to know how to change the oil in your truck. In this guide, we’ll walk you through each step of the process so that you can do it yourself with ease. We’ll also provide some helpful tips that will make the process go more smoothly.

The Toyota Tundra is one of the most popular trucks on the road, and needs regular oil changes to keep it running smoothly.  Here are some things you should know about how often your truck needs its oil changed, what type of oil to use, and how much will cost before getting started with this simple guide for 2013 Toyota Tundra owners.

2013 toyota tundra

2013 Toyota Tundra Oil Type

2013 toyota tundra oil change

If you are not sure what oil type your 2013 Toyota Tundra needs, we suggest you to check your owner’s manual, or find it online. Anyway, we are glad to tell you everything you need to know about your car’s perfect oil type.


It is very preferred to use 0W-20 at all temps. The manufacturer finds 0W-20 the best choice for good fuel economy and starting in cold weather for 2013 Toyota Tundra. Although, if 0W-20 is not available 5W-20 may be used. But in this case it is recommended to use 0W-20 at the next oil change.


It is better to use SAE 0W-20 oil type for the 2013 Toyota Tundra. If SAE 0W-20 is not available, SAE 5W-20 oil may be used temporarily until the next oil change. The 2013 Toyota Tundra 4.0L model oil capacity is 6.4 quarts or 6.1 liters. The 2013 Toyota Tundra 4.6L and 5.7L model oil capacity is 7.9 quarts or 7.5 liters.


The most suitable oil for your 2013 Toyota Tundra is Toyota Genuine Motor Oil Fuel Economy SAE 0W-20. This oil meets the lubrication requirements of petrol and diesel engines. But Mobil 1 and Castrol are also certified partners of Toyota, so note that there’s a full range of of motor oils are suitable for Toyota vehicles which meet many of Toyota’s viscosity and specification requirements.

HIGH MILEAGE OIL FOR 2013 Toyota Tundra

Mobil1 – High Mileage 0W-20 Full Synthetic Motor Oil is a very popular choice for many vehicles, and it is often used for 2013 Toyota Tundra as well.

2013 Toyota Tundra Oil Change Intervals

2013 toyota tundra oil change

The engine oil and filter should be replaced at this time. If the truck is driven in severe conditions, such as towing a trailer or off-road driving, the oil should be changed more often. Consult your Toyota dealer for specific recommendations.

Note that the oil change intervals are for normal driving conditions. Driving in severe conditions will necessitate more frequent changes. If you’re considering doing your own service, check out the Toyota OEM Maintenance Schedule to see what it says about how often you should be changing your oil.

Synthetic oil usually should be changed every 7,500 – 10,000 miles.  Toyota offers you to change oil every 10,000 miles using synthetic oil, or once a year. Many people, including mechanics, say that synthetic oil doesn’t need to be changed as often as conventional oil.

Best Oil for 2013 Toyota Tundra

2013 toyota tundra oil change

When you’re looking for the best oil to keep your car running smoothly, there are a few things that should be on every owner’s list. You don’t want any leaks or problems with engine durability; after all it could save their life! It also helps if they have access both time and cost so being able-bodied isn’t necessary (though knowledge will come in handy too). Despite these difficulties many people find themselves struggling through an overwhelming process just trying figure out what kind is right – luckily we’ve got some tips below:

Oil (by manufacturer) – Toyota recommends using Toyota Genuine Motor Oil SAE 0W-20. 2013 Toyota Tundra uses 0w-20 weight synthetic blend oil.

Leading Manufacturer Of High-Quality Products. International Renown For Our Diverse Range Of Award-Winning Products. Fully Equipped With State-Of-The-Art Technology.

Oil (our choice) – Mobil 1 is a trusted brand that is also certified by Toyota. It is a safe motor oil to use for your 2013 Toyota Tundra. It can provide better gas mileage, engine protection and performance for your 2013 Tundra engine.

Our Choice
Mobil 1 0W-20 is ideal for use in newer cars, trucks and SUVs manufactured by Honda, Toyota, Ford, Mercury and Chrysler, where a 5W-20 motor oil is recommended and also provides benefits for hybrid engines.

Oil filter (by manufecturer) – If you are looking for which oil filter is perfect for your 2013 Toyota Tundra then check out this TOYOTA Replaceable Element Oil Filter.

Genuine Toyota filters are engineered to the high quality standards of the Toyota Company and are recommended by Toyota as the original equipment replacement filter for Toyota vehicles.

How to Change Oil by Yourself – Step by Step

Changing your car’s oil is a crucial maintenance task that should be carried out regularly to keep your vehicle running smoothly. So, without further ado, let’s get started!

Step 1.

We’ll be using this Mobile 1 extended performance high mileage 0W-20. You’re gonna need a leverage bar, you’re gonna need the tool for your housing. You’ll need a ratchet 14 mm for your drain plug. And the filter.

We will be using a socket that’s going to be attached to the leverage bar breaker bar. It’s very difficult to take that all housing off you will find out, so use a tool.

2013 toyota tundra oil change guide

And of course you’re going to need your a pan and your funnel plus get the plug washers.

2013 toyota tundra oil change guide

Step 2.

We’re going under the passenger side and you’ll see that there’s the plug right there 14 to the left so we’re underneath and right at the front of the car. Take off those 5 bolts. We’re going to go ahead and take this plate off. We got the skid plate off.

Step 3.

We got to come over here and take this housing. It’s what told in the oil filter. Take this off.

Then you’ll put your socket on here and turn it, break it loose.

Broke it loose and just turn it broken loose like that. So if you want to get it off, make sure you have your oil pan underneath. Clean this up.

2013 toyota tundra oil change guide

Step 4.

Take the new filter. There’s a ring on here. You’re just gonna get a little bit of oil, supposed to be new oil.

2013 toyota tundra oil change guide

Replace this little ring and you’ll do that in a minute.

Filter you want to tightness you’ll hear a click because there’s a little pin. This little thing clicks on it a little tab, click when your zip on. Now, install the new filter.

Step 5.

Add some oil. We’ll be using the 0W-20.

2013 toyota tundra oil change guide

Check the oil level about where it needs to be. Now just got to check for leaks underneath. It’s been running for about five minutes and everything’s alright, then you’re done!

Add comment