2013 Hyundai Elantra Oil Change Guide
The Hyundai Elantra is a great car, and with proper maintenance it can last for many years. In this guide, we will walk you through the process of changing the oil in your Elantra. This is a simple procedure that can be done by anyone, and it only requires a few basic tools. So if you are feeling up to the task, let’s get started!
2013 Hyundai Elantra Oil Type
As part of car maintenance, oil changes are important to keep your Hyundai Elantra in good shape. The 2013 Hyundai Elantra requires a full synthetic 5w-20 oil for all three oil changes. You can go with any brand you choose that is approved by Hyundai, but if you want to be 100% sure the oil meets Hyundai’s requirements exactly. Check the owner’s manual for your 2013 Hyundai Elantra to see when the next oil change is recommended and the type of oil you need to use.
The manufacturer recommends using 10W-30 (Above -18), 5W-20, 5W-30 (at all temperatures). SAE 5W-20 is preferred.
The 2013 Hyundai Elantra motor oil capacity is 4.23 US quarts (4.0 liters). The SAE 5W-20 or 5W-30 engine oil is recommended for all operating temperatures for the 2013 Hyundai Elantra.
SPECIFICATION OF OIL
Use Quaker State’s Full Synthetic motor oil as it is designed to protect today’s sophisticated engines such as modern turbocharged ones. The company has been the preferred aftermarket supplier in 2005 for Hyundai vehicles and one of their main reasons was because they believed Quakers’ brand had more than 100 years experience built on durability, reliability with a high quality product – just what you would expect from them!
2013 Hyundai Elantra Oil Change Intervals
Hyundai’s recommendation for an oil change is routine and universal – they recommend you get your 2021 Elantra checked out at 3-5 thousand miles or 7500+ if it’s synthetic oils. If it seems like more than 10,000 miles has passed since the last time you’ve change synthetic oils – that’s fine, but don’t hesitate to change it anymore. This will ensure that everything still operates smoothly in between changes of fluids.
For the Hyundai Elantra, changing your oil is an simple task. It’s one of the easiest cars to get into and change out the oils for this model year. The oil filter can be found on top of the engine block – just below the air filter housing. Other than that it’s just a matter of draining and filling your car with new fluids before you go back on your way – ride safe knowing everything is brand spanking new under there!
Best Oil for 2013 Hyundai Elantra
The 2013 Hyundai Elantra’s engine is a 2.0 liter 4-cylinder that produces 148 horsepower and 131 foot-pounds of torque. In general, the manufacturer recommends using 5w20 oil in this particular vehicle as long as it meets Hyundai’s viscosity recommendations specifically. However, those who have been looking at user reviews have been noting that some people have been fine with changing to either a 5w30 or even a 10w30 oil without having any issues occur as a result of doing so. You may choose the proper viscosity according to your driving conditions, but we recommend you to follow the manufacturer’s recommendations.
Oil (by manufacturer) – Hyundai recommends using Quaker State Motor Oil, Synthetic Blend 5W-20 2013 Hyundai Elantra uses synthetic blend oil.
Oil (our choice) – Pennzoil – Ultra Platinum Full Synthetic 5W-20 Motor Oil for 2013 Hyundai Elantra is safe to use. It can provide better gas mileage, engine protection and performance for your Elantra engine.
Oil filter (by manufecturer) – If you are looking for which oil filter is perfect for your 2013 Hyundai Elantra then check out this HYUNDAI Genuine Oil Filter.
How to Change Oil by Yourself – Step by Step
Would you like to change the oil on your 2013 Hyundai Elantra by yourself? If so, this guide will show you how to do it step by step. The process is not difficult, but it is important that you take your time and follow the instructions carefully. Changing the oil on your car can help keep it running smoothly and extend its life. So if you’re feeling up to the challenge, let’s get started!
Let’s change the oil on a Hyundai Elantra.
First we’ll check to see if we can change the oil without lifting the car. There’s not enough clearance so we’ll need to jack up the car. Position the jack under a jack point or a body rail. And for safety always use a jack stand when you’re lifting a car. Let’s go to the top of the engine number remove the oil cap. This will help the oil drain better.
Here’s some of the tools and supplies we’ll need oil oil filter wrench socket, oil pan and an oil filter wrench.
Let’s go under the car and find the oil drain plug and we’ll put the oil pan under the drain plug. Now we’ll use a socket wrench and a 17 millimeter socket and will loosen the oil drain plug. You can use a longer socket wrench if the oil drain plug is difficult to remove. When the oil plug is loose, remove it by hand and let the oil drain into the oil drain pan. You can let the oil drain for approximately five minutes. We’ll go under the engine and we’ll replace the oil drain plug. We’ll use our socket wrench again and we’ll tighten the oil drain plug. Do not over tighten the oil drain plug as this could damage the oil pan.
Now let’s find the oil filter at the bottom of the engine. The oil filter is easily accessible at the right front of the engine. The oil filter is a spin on type and it’s available at most auto parts stores. Let’s get her oil filter wrench and we’ll loosen the oil filter turn the wrench counterclockwise and loosen the oil filter by hand. Make sure to position your oil pan under the oil filter to catch any remaining oil from the oil filter.
Let’s get our new filter and apply a small amount of oil to the oil filter gasket. Make sure the oil filter mounting surface is clean and install the oil filter by spinning it clockwise. Tighten the oil filter by hand according to the instructions that came with the oil filter. Let’s lower the car and remove our jack stands.
Let’s go to the top of the engine and we’ll use a funnel to add the new oil. Check your owner’s manual to see what type of oil to use. For this engine we’ll be using four and a half quarts of a 5W-20 conventional oil we’ll remove and clean our funnel and we’ll replace our oil filler cap tighten the cap until it clicks check the oil dipstick to make sure the oil level is full. And finally check for leaks under the engine.
Let’s do some cleanup and will pour old oil into the oil container. Remember to always recycle your old oil and oil filter. Now let’s start the car. Look for any oil warning lights and take the car for a test drive. And that’s an oil change on a 2013 Hyundai Elantra.